Korg KRONOS SGX-2 Parameter Manual page 377

(Connection)
This read-only parameter shows the jack to which the
selected jack is connected, including the normalled
connection. If nothing is connected to the jack, the bottom
line reads "(No Connection)."
If the selected jack is an output connected to multiple inputs,
only the first connection is shown, followed by an ellipse.
If the default connection from Algorithm is active, it is
shown in parentheses.
Input or Output Level
This sets the input or output volume level of the jack. It
duplicates the similarly-named parameter on the block's
page.
Jump
Press the Jump button to go directly to the page of the
selected jack's block. For instance, if you've selected one of
the inputs or outputs of VPM Oscillator 2, pressing Jump
will take you to the VPM Osc 2 page.
Disconnect button
Pressing the Disconnect button clears all cables connected
to the jack.
v 4–1: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 153.
• 0: Write Program. For more information, see "Write
Program" on page 153.
• 1: Exclusive Solo. For more information, see "Exclusive
Solo" on page 153.
• 2: Delete All Connections. For more information, see
"Delete All Connections" on page 329.
• 3: Copy VPM Oscillator. For more information, see
"Copy VPM Oscillator" on page 395.
• 4: Swap VPM Oscillators. For more information, see
"Swap VPM Oscillators" on page 395.
[Jack name]
[0...100]
Program P4: Patch Panel 4–1: Patch Panel
363