Korg KRONOS SGX-2 Parameter Manual page 1160

Appendices
Note on/off
Note-on [9n, kk, vv]
Note-off [8n, kk, vv]
(n: channel, kk: note number, vv: velocity)
When you play a note on the KRONOS's keyboard, it will
transmit note-on/off messages.
While KARMA is operating, the note-on/off data generated
by KARMA will be transmitted. ("Local Control On
settings" on page 1144)
However, most instruments do not receive or transmit note-
off velocity, and neither does the KRONOS.
Program Change/Bank Select
Changing the program/bank
Program change [Cn, pp]
(n: channel, pp: program number that allows 128 sounds to
be selected)
• Programs 000–127 in banks I–A...F and U–A...GG
correspond to program changes [Cn, 00]–[Cn, 7F].
• Programs 001–128 in banks G, g(1), g(2), g(3), g(4),
g(5), g(6), g(7), g(8), g(9), and g(d) correspond to
program changes [Cn, 00]–[Cn, 7F].
Bank select MSB (CC#0) [Bn, 00, mm]
Bank select LSB (CC#32) [Bn, 20, bb]
(n: channel, mm: bank number upper byte, bb: bank number
lower byte)
• The internal banks that correspond to each bank select
number will depend on the "Bank Map" setting (Global
0–1d). Korg is the default setting. For more information,
see "Bank Map" on page 766.
Simply receiving a Bank Select message will not cause the
program or bank to change. The program or bank will
actually change when a Program Change message is
received.
Program mode
• In Program P0: Play, program change and bank select
messages are transmitted and received on the global
MIDI channel. These messages are not received in P1–
P9.
Combination and Sequencer modes
• Program change and bank select messages can be
received on the MIDI channel specified for each
timbre/MIDI track to select programs on that
timbre/track.
• When you select a combination, program change and
bank select messages will be transmitted by timbres
whose Status is EXT or EX2.
In Sequencer mode, program change or bank select
messages will be transmitted by tracks whose Status is
BTH, EXT, or EX2 when you select the "Program Select"
parameter (0–1b), when you select a song, or when you
return to the beginning of a measure. (See "0–1b: Track
Program Select" on page 530.)
• In Combination and Sequencer modes,
transmission/reception can be switched on/off for each
timbre/track. See "Enable Program Change" on
page 477, and "Enable Program Change" on page 589.
1146
Set List mode
• Program Change messages on the Global Channel select
the Slot, and Bank Select messages on the Global
Channel select the Set List.
When a Slot is selected via MIDI, the display updates if
necessary to show the appropriate group of 16 buttons.
• Selecting a Slot sends Program Change and Bank Select
messages, as above.
When selected, Combinations and Songs can transmit
other Program Change and Bank Select messages on
other channels, as they do in Combination and Sequencer
modes.
• The Global P0 Bank Map (Korg, GM(2)) parameter
does not affect the reception or transmission of Set List
Program and Bank Select messages.
Selecting combinations
You can use program change and bank select messages to
select combinations in the same way that you select
programs.
• Combinations 000–127 in banks I–A...G and U–A...G
correspond to program changes [Cn, 00]–[Cn, 7F].
• Similarly as for program banks, the internal banks that
correspond to each bank select number will depend on
the "Bank Map" setting (Global 0–1d). For more
information, see "Bank Map" on page 766.
• In Combination P0: Play, program change and bank
select messages are transmitted/received on the global
MIDI channel. They are not received in P1– P9.
Note: All program changes can be turned off in MIDI Filter
(Global 1–1c)
As needed, you can independently turn all program changes
on/off, specify whether or not incoming messages will be
able to change combinations, and turn
reception/transmission of bank select messages on/off.
• If "Enable Combination Change" (Global 1–1c) is
unchecked, the combination will not change even if a
program change on the global MIDI channel is received
in Combination P0: Play. In this case, the program of the
timbre that matches the MIDI channel of the received
message will change.
• If "Enable Bank Change" (Global 1–1c) is unchecked,
bank select messages will not be transmitted or received.
After touch
Channel aftertouch [Dn, vv]
(n: channel, vv: value)
On most KRONOS models, applying further pressure on the
keyboard after playing a note will apply an aftertouch effect,
and will also transmit channel aftertouch.
Note: The KRONOS2-88LS responds to aftertouch data
from MIDI, but its keyboard does not generate aftertouch.
• After touch for the entire instrument can be turned on/off
in "Enable After Touch" (Global 1–1c).
• In Combination and Sequencer modes, after touch can be
switched on/off independently for each timbre/track
("Enable After Touch" Combination 3–1a, Sequencer 3–
1a).