Korg KRONOS SGX-2 Parameter Manual page 1143

When the KARMA LATCH switch is off, pressing the
connected damper pedal will turn latch on, and releasing it
will turn latch off.
Setting 2 (Combination mode)
A Note Latch (7–4b):
B Note Latch (7–4b):
Dynamic MIDI 1 Source (7–7b):
Dynamic MIDI 1 Bottom (7–7b):
Dynamic MIDI 1 Top (7–7b):
Dynamic MIDI 1 Action (7–7b):
Dynamic MIDI 1 Destination (7–7b):
Dynamic MIDI 1 A (7–7b):
Dynamic MIDI 1 B (7–7b):
Dynamic MIDI 1 Polarity (7–7b):
When the KARMA LATCH switch is on, latch will be on for
KARMA Module A, and latch will be off for KARMA
module B.
When the KARMA LATCH switch is off, pressing the
connected damper pedal will turn latch on for both modules
A and B, and releasing the pedal will turn latch off for both
modules A and B.
Auto Transpose On/Off
Controls on/off of the auto transpose function.
Note: You will normally select the JS+Y (CC#01)...JS X
controller group as the source.
Auto Transpose Range
Controls the amount of transposition for the auto transpose
function.
When "AutoTranspose On/Off" is on, playing chord data for
each KARMA module within the keyboard range specified
as the "Auto Transpose Range" source will automatically
transpose the current chord, rather than enter a new chord.
Note: Select the source from the Short Note...Black Note
note group. The Polarity (7–7b) setting will be ignored. If
you select a source from the JS+Y (CC0#1)...JSX controller
group or the Velocity...Velocity Outside Zone velocity
group, it will not be possible to control the transpose amount
of the auto transpose function.
Examples of use
Settings (Program mode)
Dynamic MIDI 1 Source (7–7b):
Dynamic MIDI 1 Bottom (7–7b):
Dynamic MIDI 1 Top (7–7b):
Dynamic MIDI 1 Action (7–7b):
Dynamic MIDI 1 Destination (7–7b):
Dynamic MIDI 1 Polarity (7–7b):
Dynamic MIDI 2 Source (7–7b):
Dynamic MIDI 2 Bottom (7–7b):
Dynamic MIDI 2 Top (7–7b):
Dynamic MIDI 2 Action (7–7b):
Dynamic MIDI 2 Destination (7–7b):
Dynamic MIDI 2 Polarity (7–7b):
Dynamic MIDI Sources & Destinations Dynamic MIDI Destinations
On
Off
Damper(CC#64)
000
127
Momentary
Note/Env Latch
On (checked)
On (checked)
+
[Momentary]
[Continuous]
KARMA Switch 1
000
127
Momentary
AutoTranspose On/Off
+
Note
000 (C-1)
060 (C4)
C
AutoTranspose Range
+
1. Turn on KARMA, and play the keyboard. Play a
Cmaj7 chord.
KARMA will generate a phrase according to the selected
GE and the settings of the KARMA module.
2. Turn on KARMA SWITCH 1.
The auto transpose function will be turned on. The
Cmaj7 chord will be remembered.
3. When you play a note number in the range specified
by Bottom and Top (7–7b), the Cmaj7 chord will be
transposed with that note as the root.
If you play D3, KARMA will generate a phrase based on
Dmaj7. If you play E3, the phrase will be based on
Emaj7.
4. Turn off KARMA SWITCH 1. The auto transpose
function will be turned off, and KARMA will resume
normal operation.
Module Stop
Controls KARMA module stop.
Operating the selected source controller when KARMA is
operating will stop the playback of the KARMA Module.
(KARMA will remain on.) When you apply a trigger (for
example by playing the keyboard), the module will resume
functioning.
Melodic Repeat Stop
Allows additional notes generated by the "Melodic Repeat"
feature to be stopped. This is valid only when the GE
selected by the KARMA module uses the "Melodic Repeat"
function.
Example
Some GEs (but not all of them) utilize "Melodic Repeat" to
generate additional repeated notes from the notes that are
generated. The repeated notes created by "Melodic Repeat"
will normally continue playing their specified number for
repeats even when you turn off the KARMA ON/OFF
switch.
If you want the repeated notes to stop immediately when you
turn KARMA off, use the KARMA ON/OFF switch to
control Repeat Stop.
Settings (Program mode)
Dynamic MIDI 1 Source (7–7b):
Dynamic MIDI 1 Bottom (7–7b):
Dynamic MIDI 1 Top (7–7b):
Dynamic MIDI 1 Action (7–7b):
Dynamic MIDI 1 Destination (7–7b):
Dynamic MIDI 1 Polarity (7–7b):
Module Stop & Repeat Stop
Combines the effects of Module Stop and Melodic Repeat
Stop (above), so that all note generation from the assigned
module(s) will be immediately terminated.
Note: You can use a source from any of the three groups, but
typically it will be the Controller Group.
Module Pause
Operating the selected source controller when KARMA is
operating will pause the playback of the KARMA Module.
When the KARMA module parameter "Run"
(Combination/Sequencer 7–1c) is turned Off (unchecked),
the KARMA module will continue operating internally
[Momentary]
[Momentary]
KARMA On/Off
000
127
Momentary
Repeat Stop
–
[Momentary]
[Momentary, Toggle]
1129