Web Wan Access; Web Remote Control - Speco N64NR24TB User Manual

Remote Surveillance

12.3 Web WAN Access

1 Set the network of the NVR. Please refer to
2 Click Start→Settings→Network→NAT to go to the interface for NAT configuration and check "Enable". Click "Apply"
to save the settings and make note of the QR code number under the QR code. Via Internet Explorer, go to
connect.specotech.cloud, input the QR code number, your username and password to login.
PPPoE Access

1 Click StartSettingsNetworkPPPoE to go to the "PPPoE" interface. Check "Enable" in the "PPPoE settings" and
then enter the username and password you get from your ISP. Click "Apply" to save the settings.
2 Click StartSettingsNetworkNetwork Status to view the IP address of the NVR.
3 Open the web browser on your computer, enter the IP address of the NVR like http://210.21.229.138 in the
address bar and then press enter to go to the login interface. Enter the username and password of the NVR in the
interface and then click "Login" to go to the live view interface.
Router Access

1 Click StartSettingsNetworkTCP/IP to go to the "TCP/IP" interface. Set the IP address, subnet mask, gateway,
preferred DNS and alternate DNS of the NVR.
2 Set the HTTP port (it is suggested to modify the HTTP port because the default HTTP port 80 might be taken up)
and enable UPnP function in both the NVR and the router. If the UPnP function is not available in the router, you need
to forward the LAN IP address, HTTP port and server port of the NVR to the router. Port mapping settings may be
different in different routers, so please refer to the user manual of the router for details.
3 Get the WAN IP address of the NVR from the router. Open the web browser on your computer, enter the WAN IP
address plus HTTP port like http://116.30.18.215:100 in the address bar and then press enter to go to the login
interface. Enter the username and password of the NVR in the interface and then click "Login" to go to the live view
interface.

12.4 Web Remote Control

The supported browsers for remote access are IE8/9/10/11, Firefox, Opera and Chrome (available only for the versions
lower than 45) in Windows system and Safari in MAC system. Here we take IE browser for example. When you access
the NVR through IE for the first time, you need to download and install the relative components for normal preview
1 1 .1.1 TCP/IP Configuration
Note: If the WAN IP address is a dynamic IP address, it is necessary for you to use the domain name to
access the NVR. Click Start  Settings  Network  DDNS to set DDNS (see 12.1.4 DDNS
Configurationfor details). By using DDNS function you can use the domain name plus HTTP port like
http://sunshine.dvrdydns.com:100 to access the NVR via internet.
for details.
91
NVR User Manual