Table of Contents
Advertisement
PTZ
Press and hold the left button of the mouse on any area of the camera image to zoom in the image; press and hold
the right button to zoom out the image.
Move the cursor of the mouse to the camera image and then slide the scroll wheel of the mouse forward to zoom in
the image, slide the scroll wheel of the mouse backward to zoom out the image.
Preset Setting
Click "Preset" to go to preset operation tab and then click "Add" button to pop up a window as shown below. Select
the preset and then enter the preset name in the window; finally click "OK" button to save the settings. You can add
255 presets for each dome at most.
Adjust the dome's direction and then click "Save Position" to save the current preset position (you can also click
another preset in the preset list and then save the preset position after adjusting the dome's direction); click
the preset list to call the preset; click "Delete" button to delete the selected preset.
You can also go to preset setting interface for preset setting, see
Cruise Setting
Click "Cruise" to go to cruise operation tab and then click "Add" button to pop up a window as shown below left. You
can add 8 cruises for each dome at most.
1
Enter the cruise name in the "Add Cruise" window and then click "Add preset" to pop up the "Add Preset" window
(Before adding preset to the cruise, please add preset of the dome first).
2
In the "Add Preset" window, select the preset name, preset time and preset speed and then click "OK" button.
3
In the "Add Cruise" window, you can click
to delete the preset. Click "Add" button to save the cruise.
Click
to start the cruise and click
6.2 Preset Setting
to reselect the preset, then change the preset time and speed. Click
to stop the cruise in the cruise list of the cruise operation tab; click "Delete"
34
NVR User Manual
for details.
in
Advertisement
Table of Contents
