Preview On Logout; Network Security - Speco N64NR24TB User Manual

Account & Permission Management
2 Check "Enable" and then choose "Enable Allow List" or "Enable Block List" (the PC client of which the IP address is
in the allow list can access NVR remotely while the PC client in the block list cannot).
3 Add IP/IP segment/MAC. Click "Add IP" or "Add MAC" button and then check "Enable" in the popup window (only if
you check it can the IP/IP segment/MAC you add be effective). Enter the IP/IP segment/MAC and then click "OK"
button. In the above interface, click
settings.

10.5 Preview On Logout

Click StartSettingsAccount and AuthoritySecurityPreview on Logout to go to the following interface.
Set a camera and then enable or disable the preview permission on logout as required. If a camera's preview
permission on logout is "ON", you can view the live image of the camera when the system is logged out, or the live
image of the camera cannot be seen when logged out.

10.6 Network Security

Click StartSettingsAccount and AuthoritySecurityNetwork Security to go to the following interface. You can
enable APR Guard.
to edit IP/IP segment/MAC, click
77
NVR User Manual
to delete it. Click "Apply" to save the