Table of Contents
Advertisement
EZ Setup & Main Interface
Click "Camera" to view all the added cameras in the camera list. Select one camera window on the left side of the
interface and then double click one camera in the list to preview the camera image in the selected window.
Click "Single Channel Sequences" to view all the added groups in the group list; click one group in the list to view all
the added cameras in the group (refer to
Select one camera window on the left side of the interface and then double click one group in the group list to preview
the cameras' images one by one in the selected window.
Click "Customize Layout" to view all the display modes in the display mode list (refer to
configuration of the display mode). Double click one display mode in the list to switch to the display mode for
previewing.
Introduction of area ③:
3.2.2 Setup Panel
Click StartSettings to bring up the setup panel as shown below.
4.2 Add/Edit Camera Group
Icon / Button
It shows the current login user.
Click to go to the intelligent analytics interface.
Click to go to record search and export interface, see
Search, Playback & Export
Click to go to playback interface (click
bottom of the live view interface to set the default playback
time), see Introduction for details.
Click to pop up the setup panel, see
details.
Click to log out the system.
Click and then select "Logout", "Reboot" or "Shutdown" in the
popup window.
Click to go to the EZ setup.
for detail configuration of the camera group).
Meaning
for details.
on the tool bar at the
3.2.2 Setup Panel
15
NVR User Manual
5.2.1 Display Mode
for detail
8. 4 Record
for
Advertisement
Table of Contents
