Tampering - Speco N64NR24TB User Manual

Alarm Management
handling setting of object detection alarm is similar to that of the sensor alarm (see
3 Click "Apply" to save the settings. You can click "Object Config" to go to the object detection configuration
interface.

9.4.6 Tampering

Tampering Configuration:
1 Click StartSettingsCamera Smart SettingsTampering to go to the following interface.
2 Select the camera and enable the relevant detection as needed.
Scene Change: Alarms will be triggered if the scene of the monitor video has changed.
Video Blurred: Alarms will be triggered if the video becomes blurry.
Video Color Cast: Alarms will be triggered if the video becomes obscured.
3 Set the sensitivity of the exception detection.
4 Click "Apply" to save the settings.
5 Click "Processing Mode" to go to the alarm handling configuration interface of exception detection.
Exception Alarm Handling Configuration:
1 Click StartSettingsAlarm Smart EventException to go to the interface.
2 Enable or disable "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer", "Pop-up Video" and "E-mail". The alarm
handling setting of exception detection alarm is similar to that of the sensor alarm (see
3 Click "Apply" to save the settings. You can click "Exception Config" to go to the exception detection configuration
interface.
66
NVR User Manual
9.1 Sensor Alarm for details).
9.1 Sensor Alarm for details).