Scanner Cleaning Message; Backup File Transmission - Gestetner F104 Advanced Features

StellaF2_EN_Combine_F_FM.book Page 62 Friday, February 14, 2003 5:16 PM
Other Transmission Features

Scanner Cleaning Message

If dirt is stuck to the scanner, the other
party receives fax messages with
black lines. When the scanner is dirty,
the warning message "
tact Glass and White Strip
displayed after scanning is complete.
If this message is displayed, wipe the
contact glass and white strip to re-
3
move the dirt, and then press the
{ { { { OK} } } } key.
Note
❒ You can select whether this mes-
sage is displayed or not when the
machine detects that the scanner is
dirty with the User Parameters.
"On" (Displayed) is selected by de-
fault. See p.146 "User Parameters"
(switch 20, bit 7).
❒ If the dirty part of the scanner is
small, that is, 0.127 mm (0.005 in.)
or smaller, the machine tries to
erase the black line made when
scanning originals. The black line
is less visible on the received mes-
sage. However, sometimes very
small parts of the image might be
missing on the received message.
You can turn this function on or off
with the User Parameters. It is
turned on by default. See p.146
"User Parameters" (switch 20, bit
4).
❒ Transmission is not interrupted
even if the machine detects that the
scanner is dirty.
62

Backup File Transmission

When turned on, this feature sends a
backup copy of all faxes you send to
destinations that you specify.
Clean Con-
Preparation
" is
You must specify the backup desti-
nations beforehand. See p.140
"Backup File Transmission Set-
tings" .
Note
❒ This function works with the fol-
lowing features:
• Memory Transmission
• Transfer Request Transmission
• Confidential Transmission
• SUB Code Transmission
• Mail Transmission (NIC FAX
See p.34 "Memory Transmis-
sion", Basic Features.
See p.20 "Transfer Request".
See p.7 "Sending Confidential
Messages".
See p.11 "SUB Code Transmis-
sion".
unit (Option for Type1) re-
quired)