How To Select The Line - Gestetner F104 Advanced Features

StellaF2_EN_Combine_F_FM.book Page 54 Friday, February 14, 2003 5:16 PM
Other Transmission Features
- How to Select the Line When -
- -
G3 Line(s) Are Connected
through a PABX
W hen one G3 lin e is c onnec ted
through a PABX, change the G3 line
setting to a PABX line (extension)
with the User Parameters, and then
assign the Extension function to a
User Function key. You can choose
3
whether to use a PABX line or a PSTN
line by pressing the User Function
key in which the Extension function is
stored.
When both G3 lines are connected
through a PABX, you can select the
line by just performing the "How to
Select the Line" procedure.
Reference
p.54 "How to Select the Line"
p.146 "User Parameters"
54

How to Select the Line

When the optional extra G3 interface
unit is installed, you can store the
Line Select function in one of the User
Function keys.
Preparation
You need to assign the Line Select
function to a User Function key be-
forehand. See p.105 "User Func-
tion Keys" .
A A A A
Press the User Function key ({ { { { F1} } } }
to { { { { F10} } } } ) with the Line Select
function programmed in.
B B B B
Press 0 0 0 0 or 1 1 1 1 to select the line.
C C C C
Press the { { { { OK} } } } key.