Manual Dial - Gestetner F104 Advanced Features

StellaF2_EN_Combine_F_FM.book Page 52 Friday, February 14, 2003 5:16 PM
Other Transmission Features

Manual Dial

The optional handset or an external telephone is required to use this function.
Pick up the handset or external tele-
phone and dial. When the line is con-
nected and you hear a high-pitched
tone, press the { { { { Start} } } } key to send
your fax message. If, on the other
hand, you hear a voice at the other
3
end, continue your conversation as
you would normally over the tele-
phone.
Note
❒ Results of transmissions with this
feature are not mentioned in the
Transmission Result Report.
❒ You can specify a destination with
the number keys, Quick Dial key
or Speed Dial.
❒ If you lift the handset immediately
after the machine switches to Ener-
gy Save Timer mode, there will be
no sound for a maximum of 4 sec-
onds. When you can hear sound
again, you can continue.
A A A A
Place your original, and then se-
lect any scan settings you require.
B B B B
Pick up the handset or external
telephone.
You will hear a tone.
C C C C
Dial.
The fax number you enter is dialed
immediately.
Note
❒ If you make a mistake, replace
the external telephone and try
again from step B.
Reference
p.45 "Handy Dialing Func-
tions"
52
D D D D
When the line is connected and
you hear a high-pitched tone,
press the { { { { Start} } } } key to send your
fax message.
Transmission starts. After trans-
mission, the standby display reap-
pears.
Note
❒ If you hear a voice, pick up the
handset or external telephone
before you press the { { { { Start} } } } key
and notify the destination that
you want to send a fax message
(ask them to switch to Facsimile
mode).