Mail Authentication - Gestetner DSm725e Network Manual

Mail authentication

You can configure mail authentication to prevent illegal use of the mail server.
❖ SMTP Authentication
Specify SMTP authentication (PLAN, LOGIN, CRAM-MD5, and DIGEST-
MD5).
When mail is sent to the SMTP server, authentication is performed using the
SMTP AUTH protocol by prompting the mail originator to enter the user
name and password. This prevents illegal use of the SMTP server.
A
In the menu area, click [E-mail]
B Make the following settings:
• SMTP Auth. E-mail Address: Enter the e-mail address.
• SMTP Auth. User Name: Enter the SMTP account name.
• SMTP Auth. Password: To set or change the password for SMTP AUTH.
• SMTP Auth. Encryption: Select whether to encrypt the password or not.
C Click [Apply]
D
Click [Logout].
E Quit Web Image Monitor.
❖ POP before SMTP Authentication
Select whether to log on to the POP3 server before sending e-mail.
A
In the menu area, click [E-mail].
B Make the following settings:
• POP before SMTP: Enable or disable POP before SMTP.
• POP E-mail Address: Enter the e-mail address.
• POP User Name: Enter the POP account name.
• POP Password: To set or change the POP password.
• Timeout setting after POP Auth.: Enter the time available before con-
necting to the SMTP server after logging on to the POP server.
C
Click [Apply].
D Click [Logout].
E Quit Web Image Monitor.
Printer Status Notification by E-Mail
2
55