Gestetner DSm725e Network Manual page 38

Using a Printer Server
U
In the [Available objects] box, click the queue you created, and then click [OK].
V
In the [Printers] area, click the printer you assigned, and then click [Printer
Number]
1
W
Enter the printer number, and then click [OK]. Check the settings, and then
click [OK].
Use the same printer number specified as the remote printer number using
NIB Setup Tool.
X
Start the print server by entering the following from the console of the Net-
Ware server.
If the print server is in operation, quit and restart it.
❖ To exit
CAREE: unload pserver
❖ To start
CAREE: load pserver print_server_name
Setting up using NIB Setup Tool
A
Log on to the file server as an administrator or administrator equivalent.
B
Start NIB Setup Tool from the [Start] menu.
C
Click [Property Sheet], and then click [OK].
D
Select the printer you want to configure, and then click [Finish].
A dialog box prompting you to perform the remaining configuration tasks in
the Web browser appears. Click [OK], and then wait until Web Image Monitor
starts automatically.
E
A dialog box for entering the [User Name] and [Password] appears.
Enter the user name and password, and then click [OK].
For details about the login user name and password, consult your network
administrator.
F
Click [Configuration] in the left area, click [Network], and then click [NetWare].
G
Confirm the settings, and then click [Apply].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
H
Click [Logout].
Reference
For details, see p.22 "Setting Up as a Print Server (NetWare 3.x)"
30