Setting Up As A Remote Printer (Netware 3.X) - Gestetner DSm725e Network Manual

Using a Printer Server
Setting up using NIB Setup Tool
A
Log on to the file server as an administrator or administrator equivalent.
B
1
Start NIB Setup Tool from the [Start] menu.
C
Click [Property Sheet], and then click [OK].
D
Select the printer you want to configure, and then click [Finish].
A dialog box prompting you to perform the remaining configuration tasks in
the Web browser appears. Click [OK], and then wait until Web Image Monitor
starts automatically.
E
A dialog box for entering the [User Name] and [Password] appears.
Enter the user name and password, and then click [OK].
For details about the login name and password, consult your network admin-
istrator.
F
Click [Configuration] in the left area, click [Network], and then click [NetWare].
G
Confirm the settings, and then click [Apply].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
H
Click [Logout].
Reference
For details , see p.22 "Setting Up as a Print Server (NetWare 3.x)"

Setting Up as a Remote Printer (NetWare 3.x)

Follow the procedure below to use the machine as a remote printer under Net-
Ware 3.x.
Setting up using PCONSOLE
A
Enter "PCONSOLE" from the command prompt.
F:> PCONSOLE
B
Create a print queue.
When using the existing print queue, go to the procedure for creating a printer.
C
From the [Available Options] menu, select [Print Queue Information], and then
press the {Enter} key.
D
Press {Insert} key, and then enter a print queue name.
E
Press {Esc} key to return to the [Available Options] menu.
26