Table of Contents
Advertisement
Getting Started
When the Authentication Screen is
Displayed
1
When Basic Authentication, Windows Authentication, LDAP Authentication, or
Integration Server Authentication is set, the Authentication Screen appears on
the screen. Unless a valid user name and password are entered, operations are
not possible with the machine.
Important
❒ Consult the User Administrator about your login user name and login pass-
word. For details of the various types of user authentication, consult the re-
spective administrators.
❒ When User Code Authentication is set, the screen for entering a user code is
displayed instead.
Note
❒ "Authentication has failed." appears if the authentication failed. Check the lo-
gin user name and login password.
User Code Authentication (Using the Control Panel)
When User Code Authentication is set, the following screen appears:
Enter a user code (up to eight digits), and then press [OK].
Note
❒ To log off, do one of the following:
• Press the Operation switch.
• Press the {User Tools} key, press [System Settings], and then press the {User
Tools} key.
• Press the {Energy Saver} key after jobs are completed.
20
Advertisement
Table of Contents
