Gestetner DSm725e Network Manual page 111

Message
Established SPX Connection with PServer,
(RPSocket=<socketnumber>, connID=<con-
nection ID>)
exiting
Exit pserver
Frametype =<frame typename>
httpd start.
inetd start.
< Interface >: Subnet overlap.
IPP cancel-job: permission denied.
IPP job canceled. jobid=%d.
LeaseTime=<lease time>(sec), Renew-
Time=<renewtime>(sec).
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY>)
Memory allocate error.
Name registration success. WINS Serv-
er=<WINS server address> NetBIOS
Name=<NetBIOS name>
Name registration success in Broadcast
name=<NetBIOS Name>
Name registration failed. name=<NetBIOS
name>
nbtd start.
nprinter start (Netware)
nwstart start. (NetWare)
Open log file <file name>
papd start. (AppleTalk)
Problem and solutions
(In the remote printer mode) Connection to the
print server has been established.
The lpd service has ended and the system is
exiting the process.
(In the print server mode) The print server
function is disabled because the necessary
print server settings have not been made.
The frame type name is configured to be used
on NetWare.
The httpd service has started.
The inetd service has started.
The same IP address and the subnet mask is
used with other device.
The printer could not authenticate the name of
the user attempting to cancel a job.
The spooled job was canceled due to error or
user request.
The resource lease time received from the
DHCP server is displayed in [lease time] in
seconds. The renewal time is displayed in [re-
new time] in seconds.
(In the print server mode) Login to the file
server is in the NDS or BINDERY mode.
Data cannot be obtained.
Disconnect the USB cable, and then connect it.
Name registration of <NetBIOS Name> to
<WINS server address> was successful.
Name registration by Broadcast name of <Net-
BIOS Name> was successful.
Name registration of <NetBIOS Name> failed.
Change to different NetBIOS name.
The nbtd service has started.
(In the remote printer mode) The NetWare
service has started.
The service for NetWare protocol stack setting
has started.
(In the print server mode) The specified log file
has been opened.
The AppleTalk print service has started.
Message List
2
103