Gestetner DSm725e Network Manual page 28

Using a Printer Server
A
From the [Start] button on the task bar, point to [Programs], point to [SmartDe-
viceMonitor for Client], and then click [Print Server Setting].
The print server setting dialog box appears.
B
1
Select the [Notify client PCs of printout/data-transmission ] check box, and then
click [OK].
After print server setting is made, a dialog box appears. Confirm the dialog
box content, and click [OK].
Click [Cancel] to interrupt the procedure.
A dialog box appears for client setting.
C
Click [OK].
The print server setting is completed. Each client must be set to receive print
notification.
Note
❒ Current printing jobs restart from the beginning after the spooler pauses
briefly.
❒ When the expansion function is not used, the function is automatically set
as available.
❒ If you log on using an account that does not have Administrator privileges,
the client may not be notified.
Setting a Client
A
From the [Start] button on the task bar, point to [Program], point to [SmartDe-
viceMonitor for Client], and then click [Extended Features Settings].
A dialog box for setting the expansion function appears.
B
Select the [Notify of printout/data-transmission/cancellation.] check box, and then
click [Detailed Settings].
C
Select the [Notify of printout/data-transmission when using print server] check box
on the [Notification Settings] screen.
D
Click [OK].
The dialog box for setting the expansion function closes. The client setting is
completed.
Note
❒ Set the printing notification function on the printer driver as well as on
SmartDeviceMonitor for Client.
20