WARNING: Avant de commencer à travailler sur un appareil muni d'un interrupteur
On. Off (Marche/Arrêt), Coupez l'alimentation et débranchez le cordon d'alimentation
de toute source d'alimentation.
Dans le cas d'une alimentation à courant continu, repérez le disjoncteur sur le tableau
de contrôle qui alimente le circuit c.c., placez-le en position d'off (arrêt) et maintenez
le bouton du disjoncteur en position d'arrêt à l'aide de ruban adhésif.
Power Cable Warning
WARNING: This unit has two power cables. To avoid electric shock, disconnect both
power cables before servicing the unit.
WARNING: Cette unité possède deux cordons d'alimentation. Pour supprimer tout
risque électrique, débranchez les deux cordons d'alimentation de l'unité.
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable
for another product.
Working with Lasers
Some Juniper Networks devices are equipped with fiber-optic ports, which emit
radiation that may be harmful to the human eye. Fiber-optic ports are considered
Class 1 laser or Class 1 LED ports.
WARNING: Class 1 Laser product.
Chapter 11: Installation Guidelines and Requirements
Safety Notices
61