Chapter 1 C Series Controller Overview; System Description; C Series Controller Models; C Series Model Components - Juniper C Series Hardware Manual

Chapter 1
C Series Controller Overview

System Description

C Series Controller Models

This chapter provides introductory information about the C Series Controller. Topics
include:
System Description on page 3
C Series Controller Models on page 3
C Series Model Components on page 5
Network Management Tools on page 6
The C Series Controller enables you to easily install, configure, and support Juniper
Networks Session and Resource Control-Policy Engine (SRC PE) software. It provides
easy access to troubleshooting information, such as reporting events, logs, and system
dumps while providing session resource controller functionality.
There are two C Series Controller models: the C2000 model and the C4000 model.
Each model is composed of two hard drives, fans, redundant power supplies, two
USB ports, a console management port, and four Ethernet ports. The main difference
between the two models is the number of service session licenses and concurrent
subscribers allowed on each unit.
Two C Series Controller models are available:
C2000
C4000
Both models use the same software. However, the specific model determines the
number of service session licenses and concurrent subscribers allowed on each unit.
(See Table 3 on page 3.)
Table 3: C Series Model Differences
Model
C2000
Concurrent Subscribers
200,000
System Description
3