Table of Contents
Advertisement
Chapter 3
Installing and Cabling the C Series
Controller
Before You Begin
Freestanding Installation
This chapter describes how to install the C Series Controller and attach cables. Topics
include:
Before You Begin on page 13
Freestanding Installation on page 13
Rack-Mounted Installation on page 14
Cabling the System on page 15
The Next Step on page 17
Before installing the system, be sure you:
Have a plan for installing the system that takes into consideration future
expansion.
Have the tools and accessories needed to complete the installation.
Read and understand the clearance requirements for the front and back of the
chassis for cable routing and other unit access. See "Environmental
Requirements" on page 59 for more information.
Read and understand the clearance requirements for the top and bottom of the
chassis to ensure adequate ventilation.
Prepare the equipment racks by measuring and marking space for each system
you plan to install.
When installing the system on a table top or in any other freestanding mode, be sure
to leave enough space around the system for adequate ventilation. Position the
system with easy access to the connections that it needs for power, local
communications, and remote communications.
13
Before You Begin
Advertisement
Table of Contents
