WLM1200-RMTS™ User Guide WLM1200-RMTS Hardware Description The WLM1200-RMTS Appliance is a platform is a server on which to run RingMaster Services software. This device has the hardware features, OS and RingMaster software required to function as a server for RingMaster Software.
— defined for the platform settings Web interface. Image Upgrade WLM1200-RMTS software is distributed as a single image containing both the OS and the RingMaster application. The installation procedure is based on an active/standby partitioning scheme where the new software is setup in the standby partition.
WLM1200-RMTS™ User Guide Licensing License Distribution The WLM1200-RMTS is shipped with a license certificate for 250 APs. You must install and activate the base license and all additional AP licenses. Appliance Installation Complete instructions regarding site preparation, unit unpacking and equipment installation are provided in the publication WLM1200-RMTS Hardware Setup Guide including information on cabling connections to the unit from a power source and for networking interfaces.
Page 6
# CLI Commands The CLI for this device includes a number of commands, as listed below from capture from an WLM1200-RMTS, showing commands implemented and options for accessing them and getting help regarding their use. Login login as: admin Trapeze Networks WLM1200-RMTS Platform Last login: Mon Dec 10 22:33:34 2007 from 172.21.26.220...
The platform configuration Web interface available on port 8003 provides the functionality described in the paragraphs below. After you have used the wizard to set up the WLM1200-RMTS’s IP address, either manually assigned or assigned via DHCP, you can use the CLI to verify it, and then access this address using a browser.
Page 13
Monitoring Tab There are five items under this tab, as described below: Summary Item You first see the following screen. This screen provides a summary of the WLM1200-RMTS appliance, including information on the configuration and status. CPU Load Item If you click on CPU Load, you see the following screen showing CPU Load for the last hour and providing a button to click if you wish to Pause statistics collection.
Page 16
WLM1200-RMTS™ User Guide Configuring RADIUS Authentication for User Access The WLM1200-RMTS can be configured to use RADIUS to authenticate users. Multiple servers can be configured and a default timeout value and default secret key can be configured for all RADIUS servers.