Chapter 1
C-series Platform Overview
System Description
C-series Platform Models
This chapter provides introductory information about the C-series platform. It contains
the following topics:
System Description
on page 3
C-series Platform Models
C-series Model Components
Network Management Tools
The C-series platform enables you to easily install, configure, and support Juniper
Networks Session and Resource Control-Policy Engine (SRC-PE) software. It provides
easy access to troubleshooting information, such as reporting events, logs, and system
dumps while providing session resource controller functionality.
There are two C-series platform models: the C2000 model and the C4000 model.
Each model is composed of two hard drives, fans, redundant power supplies, two
USB ports, a console management port, and four Ethernet ports. The main difference
between the two models is the number of service session licenses and concurrent
subscribers allowed on each unit.
Two C-series platform models are available:
C2000
C4000
Both models use the same software. However, the specific model determines the
number of service session licenses and concurrent subscribers allowed on each unit.
(See Table 4 on page 4.)
on page 3
on page 5
on page 6
3
System Description