Route Ip Setup; Tcp/Ip Ethernet Setup And Dhcp; Figure 3-6 Menu 1 - General Setup; Figure 3-7 Menu 3.2 - Tcp/Ip And Dhcp Ethernet Setup - ZyXEL Communications Prestige 650R-31/33 User Manual

Prestige 650R-31/33 ADSL Router
3.7

Route IP Setup

The first step is to enable the IP routing in Menu 1 – General Setup.
To edit menu 1, type in 1 in the main menu and press [ENTER]. Set the Route IP field to Yes by pressing
[SPACE BAR].
3.8

TCP/IP Ethernet Setup and DHCP

Use menu 3.2 to configure your Prestige for TCP/IP.
To edit menu 3.2, enter 3 from the main menu to display Menu 3 – Ethernet Setup. When menu 3 appears,
press 2 and press [ENTER] to display Menu 3.2 – TCP/IP and DHCP Ethernet Setup, as shown next
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.68.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Multicast= None
IP Policies=
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Figure 3-7 Menu 3.2 – TCP/IP and DHCP Ethernet Setup
Follow the instructions in the following table on how to configure the DHCP fields.
3-8
System Name= ?
Location=
Contact Person's Name=
Route IP= Yes
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
Figure 3-6 Menu 1 – General Setup
Version= RIP-1
Menu 1 - General Setup
:
First address in the
IP Pool
Size of the IP Pool
IP addresses of
the DNS servers
This is the IP
address of the
Prestige
Internet Access