Navigating The Smt Interface; Table 2-2 Main Menu Commands - ZyXEL Communications Prestige 650R-31/33 User Manual

2.9

Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are
listed in the table below.
OPERATION
Move down to [ENTER]
another menu
Move up to a [ESC]
previous menu
Move to a "hidden" Press [SPACE
menu BAR] to change No
to Yes then press
[ENTER].
Move the cursor [ENTER] or
[UP]/[DOWN] arrow
keys.
Entering Type in or press
information [SPACE BAR], then
press [ENTER].
Required fields
<
N/A fields <N/A>
Save your [ENTER]
configuration
Exit the SMT Type 99, then press
[ENTER].
After you enter the password, the SMT displays the main menu, as shown next. The main menu also
displays the model name of the Prestige.
Hardware Installation and Initial Setup

Table 2-2 Main Menu Commands

KEYSTROKE
To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
Press [ESC] to move back to the previous menu.
Fields beginning with "Edit" lead to hidden menus and have a
default setting of No. Press [SPACE BAR] once to change No to
Yes, then press [ENTER] to go to the "hidden" menu.
Within a menu, press [ENTER] to move to the next field. You can
also use the [UP]/[DOWN] arrow keys to move to the previous
and the next field, respectively.
You need to fill in two types of fields. The first requires you to type
in the appropriate information. The second allows you to cycle
through the available choices by pressing [SPACE BAR].
? > or ChangeMe All fields with ChangeMe or the symbol <?> must be filled in
order to be able to save the new configuration.
Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
Save your configuration by pressing [ENTER] at the message
"Press ENTER to confirm or ESC to cancel". Saving the data on
the screen will take you, in most cases to the previous menu.
Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
Prestige 650R-31/33 ADSL Router
DESCRIPTION
2-11