2.6
Turning On Your Prestige
At this point, you should have connected the DSL, LAN 10/100M, console and power ports to the
appropriate devices. Make sure the power adapter is plugged into an appropriate power source and the
power switch (located on the back of your Prestige) is "on" (or pressed).
2.7
Configuring Your Prestige For Internet Access
Configure your Prestige for Internet access using:
Web Configurator (refer to the Read Me First)
SMT (System Management Terminal). Access the SMT via:
o
LAN or WAN using Telnet
o
Console port using terminal emulation software
The remainder of this user's guide shows you how to configure the Prestige for Internet access using SMT
screens through the console port. There are also some sections in this guide that also focus on using Telnet
to configure the Prestige.
Hardware Installation and Initial Setup
Figure 2-5 Prestige with ADSL over ISDN
Prestige 650R-31/33 ADSL Router
2-7