ZyXEL Communications Prestige 650R-31/33 User Manual page 183

FIELD
How Often Should this schedule set recur weekly or be used just once only?
Press the [SPACE BAR] and then [ENTER] to select Once or
Weekly. Both these options are mutually exclusive. If Once is
selected, then all weekday settings are N/A. When Once is
selected, the schedule rule deletes automatically after the
scheduled time elapses.
If you selected Once in the How Often field above, then enter the
Once:
date the set should activate here in year-month-date format.
Date
Weekday: If you selected Weekly in the How Often field above, then select
the day(s) when the set should activate (and recur) by going to
Day
that day(s) and pressing [SPACE BAR] to select Yes, then press
[ENTER].
Start Time Enter the start time when you wish the schedule set to take effect
in hour-minute format.
Duration Enter the maximum length of time this connection is allowed in
hour-minute format.
Action Forced On means that the connection is maintained whether or
not there is a demand call on the line and will persist for the time
period specified in the Duration field.
Forced Down means that the connection is blocked whether or
not there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a
demand call on the line. Disable Dial-On-Demand means that
this schedule prevents a demand call on the line.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11
from the main menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or
PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets field available as
shown next.
Call Scheduling
Table 14-1 Schedule Set Setup Fields
DESCRIPTION
Prestige 650R-31/33 ADSL Router
EXAMPLE
2000-01-01
Forced On
Once
Yes
No
N/A
09:00
08:00
14-3