Pptp Encapsulation - ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 User Manual

Table 9-1 Fields in Menu 11.1 (Ethernet Encapsulation)
FIELD
Service Name This is valid only when you have chosen PPPoE encapsulation. If you are
using PPPoE encapsulation, then type the name of your PPPoE service
here.
Outgoing
My Login This field is applicable for PPPoE encapsulation only. Enter the login
name assigned by your ISP when the Prestige calls this remote node.
Some ISPs append this field to the Service Name field above (e.g.,
jim@poellc) to access the PPPoE server.
My Password Enter the password assigned by your ISP when the Prestige calls this
remote node. Valid for PPPoE encapsulation only.
Server IP This field is valid for RoadRunner service type only. The Prestige will find
the RoadRunner Server IP automatically if this field is left blank. If it does
not, then you must enter the authentication server IP address here.
Route This field refers to the protocol that will be routed by your Prestige – IP is
the only option for the Prestige 10.
Edit IP This field leads to a "hidden" menu. Press [SPACE BAR] to select Yes
and press [ENTER] to go to Menu 11.3 - Remote Node Network Layer
Options.
Session This field leads to another "hidden" menu. Use the [SPACE BAR] to select
Options Yes and press [ENTER] to open menu 11.5 to edit the filter sets. See the
Remote Node Filter section for more details.
Edit Filter
sets
Once you have configured the Remote Node Profile Menu, press [ENTER] to return to menu 11. Press
[ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press [ESC] at any time
to cancel.

9.2.2 PPTP Encapsulation

If you change the Encapsulation to PPTP in Menu 11.1, then you will see the next screen. Please see the
appendix for information.
Remote Node Setup
Prestige 324 Intelligent Broadband Sharing Gateway
DESCRIPTION EXAMPLE
poellc
jim
*****
IP
Yes
Yes
9-3