Table of Contents
Advertisement
Step 4.
Select Type as One-to-One (direct mapping for packets going both ways), and enter the local
Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as 10.132.50.1
(our first IGA). (See Figure 11-19).
Step 5.
Repeat the previous step for rules 2 to 4 as outlined above.
Step 6.
When finished, menu 15.1.1 should look like as shown in Figure 11-20.
The following figure shows how to configure the first rule.
11-24
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Addr= N/A
Network Address Translation= Full Feature
Metric= 1
Private= No
RIP Direction= None
Version= N/A
Enter here to CONFIRM or ESC to CANCEL:
Figure 11-18 Example 3: Menu 11.3
NAT
Advertisement
Table of Contents
Troubleshooting
