Time And Date Setting; Figure 18-6 Menu 24 - System Maintenance - ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 User Manual

18.3 Time and Date Setting

Time and Date Setting is a software mechanism to set the time manually or get the current time and date
from an external server when you turn on your Prestige. Menu 24.10 allows you to update the time and date
settings of your Prestige. The real time is then displayed in the Prestige error logs and firewall logs. If you
do not choose a time service protocol that your timeserver will send when you turn on the Prestige, then
you can enter the time manually but each time the system is booted, the time and date will be reset to
2000/01/01 00:00:00.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.
Then enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the time
and date settings of your Prestige as shown in the following screen.
System Maintenance & Information
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
Figure 18-6 Menu 24 — System Maintenance
18-5