Netbios Filter Configuration - ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 User Manual

Prestige 324 Intelligent Broadband Sharing Gateway
The filter types and their default settings are as follows.
NAME
LAN to WAN
WAN to the LAN
IPSec Packets
Trigger dial

NetBIOS Filter Configuration

Syntax: sys filter netbios config <type> <on|off>
where
<type> =
<on|off> =
Example commands
sys filter netbios config 0 on
Command:
10
This field displays whether NetBIOS packets are blocked or
forwarded from the LAN to the WAN.
This field displays whether NetBIOS packets are blocked or
forwarded from the WAN to the LAN.
This field displays whether NetBIOS packets sent through a VPN
connection are blocked or forwarded.
This field displays whether NetBIOS packets are allowed to initiate
calls. Disabled means that NetBIOS packets are blocked from
initiating calls.
Identify which NetBIOS filter (numbered 0-3) to configure.
0 = LAN to WAN
1 = WAN to the LAN
2 = IPSec Packets
3 = Trigger dial
For types 0 and 1, use on to enable the filter and block
NetBIOS packets. Use off to disable the filter and forward
NetBIOS packets.
For type 2, use on to block NetBIOS packets from being sent
through a VPN connection. Use off to allow NetBIOS
packets to be sent through a VPN connection.
For type 3, use on to allow NetBIOS packets to initiate calls.
Use off to block NetBIOS packets from initiating calls.
DESCRIPTION EXAMPLE
Block
Block
Forward
Disabled
NetBIOS Filter Commands