Table 7-3 Lan Dhcp Setup Menu Fields; Table 7-4 Lan Tcp/Ip Setup Menu Fields - ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 User Manual

Prestige 324 Intelligent Broadband Sharing Gateway
FIELD
DHCP
Configuration:
Client IP Pool Starting
Address
Size of Client IP Pool
Primary DNS Server
Secondary DNS
Server
Follow the instructions in the table shown next to configure TCP/IP parameters for the LAN port.
FIELD
TCP/IP Setup:
IP Address
IP Subnet Mask
RIP Direction
Version Press the [SPACE BAR] to select the RIP version.
Multicast
7-8

Table 7-3 LAN DHCP Setup Menu Fields

This field enables/disables the DHCP server. If it is set to Server,
your Prestige will act as a DHCP server. If set to None, DHCP
service will be disabled and you must have another DHCP sever
on your LAN, or else the workstation must be manually configured.
When DHCP is set to Server, the following four items need to be
set.
This field specifies the first of the contiguous addresses in the IP
address pool.
This field specifies the size, or count, of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the
subnet mask. Leave these entries at 0.0.0.0 if a WAN DHCP
server provides them.

Table 7-4 LAN TCP/IP Setup Menu Fields

Enter the IP address of your Prestige in dotted decimal notation
Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
Press the [SPACE BAR] to select the RIP direction.
Options are Both, In Only, Out Only or None.
Options are RIP-1, RIP-2B or RIP-2M.
IGMP (Internet Group Multicast Protocol) is a session-layer protocol
used to establish membership in a Multicast group. The Prestige
supports both IGMP version 1 (IGMP-v1) and IGMP-v2. Press the
[SPACE BAR] to enable IP Multicasting or select None (default) to
disable it.
DESCRIPTION
DESCRIPTION
EXAMPLE
Server
(default)
192.168.1.33
32
EXAMPLE
192.168.1.1
(default)
255.255.255.0
Both
(default)
RIP-1
(default)
None
LAN Setup