13.3 Example Filter
Let's look at an example to block outside users from accessing the Prestige via telnet. See the included
support CD for more example filters.
1. Enter 21 from the main menu to open Menu 21 - Filter Set Configuration.
2. Enter the index of the filter set you wish to configure (e.g., 7) and press [ENTER]
3. Enter a descriptive name or comment in the Edit Comments field (e.g., TELNET_WAN) and press
[ENTER].
4. Press [ENTER] at the message "[Press ENTER to confirm] to open Menu 21.7 - Filter Rules
Summary.
5. Enter 1 to configure the first filter rule. Make the entries in this menu as shown in the following figure.
Filter Configuration
Prestige 324 Intelligent Broadband Sharing Gateway
Figure 13-9 Filter Example
.
13-13