Snmp Traps; Table 15-2 Snmp Configuration Menu Fields; Table 15-3 Snmp Traps - ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 User Manual

FIELD
Type the Get Community, which is the password for the incoming
Get Community
Get- and GetNext requests from the management station.
Set Community Type the Set community, which is the password for incoming Set
requests from the management station.
Trusted Host If you enter a trusted host, your Prestige will only respond to SNMP
messages from this address. A blank (default) field means your
Prestige will respond to all SNMP messages it receives, regardless
of source.
Trap: Community Type the trap community, which is the password sent with each
trap to the SNMP manager.
Trap: Destination Type the IP address of the station to send your SNMP traps to.
When you have completed this menu, press [ENTER] at the prompt "Press [ENTER] to confirm or [ESC] to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.

15.4 SNMP Traps

The Prestige will send traps to the SNMP manager when any one of the following events occurs:
TRAP #
0 coldStart (defined in RFC-1215)
1 warmStart (defined in RFC-1215)
2 LinkUp
3 LinkDown
4 authenticationFailure (defined in
RFC-1215)
6 whyReboot (defined in ZYXEL-
MIB)

Table 15-2 SNMP Configuration Menu Fields

Table 15-3 SNMP Traps

TRAP NAME
Prestige 324 Intelligent Broadband Sharing Gateway
DESCRIPTION
A trap is sent after booting (power on).
A trap is sent after booting (software reboot).
A trap is sent when the link is established.
A trap is sent when the link is down.
A trap is sent to the manager when receiving any SNMP
get or set requirements with wrong community (password).
A trap is sent with the reason of restart before rebooting
when the system is going to restart (warmstart).
EXAMPLE
DESCRIPTION
Public
Public
Blank
Public
Blank