Figure 9-9 Menu 11.1 - Remote Node Profile; Table 9-5 Menu 11.1 - Remote Node Profile (Traffic Redirect Field) - ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 User Manual

2. Traffic-redirect route.
3. Dial-backup route.
For example, if the normal route has a metric of "1" and the traffic-redirect route has a metric of "2" and
dial-backup route has a metric of "3", then the normal route acts as the primary default route. If the normal
route fails to connect to the Internet, the Prestige tries the traffic-redirect route next. In the same manner,
the Prestige uses the dial-backup route if the traffic-redirect route also fails.
If you want the dial-backup route to take first priority over the traffic-redirect route or even the normal
route, all you need to do is set the dial-backup route's metric to "1" and the others to "2" (or greater).
To configure the parameters for traffic redirect, enter 11 from the main menu to display Menu 11.1—
Remote Node Profile as shown next.
Rem Node Name= ?
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Service Name= N/A
Outgoing:
My Login= N/A
My Password= N/A
Server IP= N/A
To configure traffic redirect properties, press [SPACE BAR] to select Yes in the Edit Traffic Redirect
field and then press [ENTER].
Table 9-5 Menu 11.1 — Remote Node Profile (Traffic Redirect Field)
FIELD
Edit Traffic Press [SPACE BAR] to select Yes or No. Select No (default) if you do
Redirect not want to configure this feature. Select Yes and press [ENTER] to
configure Menu 11.6 — Traffic Redirect Setup.
Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press
[ESC] at any time to cancel.
9-12
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel.
Figure 9-9 Menu 11.1 — Remote Node Profile
DESCRIPTION
Route= IP
Edit IP= No
Session Options:
Edit Filter Sets= No
Edit Traffic Redirect= Yes
EXAMPLE
Yes
Remote Node Setup