Table of Contents
Advertisement
Step 2.
The following screen indicates that the Xmodem download has started.
Figure 21-4 System Maintenance: Starting Xmodem Download Screen
Step 3.
Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Step 4.
After a successful backup you will see the following screen. Press any key to return to the SMT
menu.
21.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the
current configuration before restoring a previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
FTP is the preferred method for restoring a previously saved configuration to your Prestige since FTP is
faster. Please note that you must wait for the system to automatically restart after the file transfer is
complete.
Firmware and Configuration File Maintenance
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...
Figure 21-5 Backup Configuration Example
** Backup Configuration completed. OK.
### Hit any key to continue.###
Figure 21-6 Successful Backup Confirmation Screen
Prestige 202H User's Guide
Type a location for storing the
configuration file or click Browse to
look for one.
Choose the Xmodem protocol.
Then click Receive.
21-7
Advertisement
Table of Contents
