Table of Contents
Advertisement
Prestige 202H User's Guide
6.2.5 DHCP Configuration
DHCP (Dynamic Host Configuration Protocol) allows the individual clients (computers) to obtain the
TCP/IP configuration at start-up from a centralized DHCP server. The router has built-in DHCP server
capability, enabled by default, which means it can assign IP addresses, an IP default gateway and DNS
servers to Windows® 95, Windows® NT and other systems that support the DHCP client. The router can
also act as a surrogate DHCP server where it relays IP address assignment from the actual DHCP server to
the clients.
IP Pool Setup
The router is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to 192.168.1.64 for
the client machines. This leaves 31 IP addresses, 192.168.1.2 to 192.168.1.32 (excluding the router itself
which has a default IP of 192.168.1.1) for other server machines, e.g., server for mail, FTP, telnet, web, etc.,
that you may have.
DNS Server Address
DNS (Domain Name System) maps a domain name to its corresponding IP address and vice versa, e.g., the
IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely important because without it, you
must know the IP address of a computer before you can access it.
There are two ways that an ISP disseminates the DNS server addresses. The first is for an ISP to tell a
customer the DNS server addresses, usually in the form of an information sheet, when s/he signs up. If your
ISP does give you the DNS server addresses, enter them in the DNS Server fields in DHCP Setup. The
second is to leave this field blank, i.e., 0.0.0.0 – in this case the router acts as a DNS proxy.
Some ISP's choose to pass the DNS servers using the DNS server extensions of PPP IPCP (IP Control
Protocol) after the connection is up. If your ISP did not give you explicit DNS servers, chances are the DNS
servers are conveyed through IPCP negotiation. The router supports the IPCP DNS server extensions through
the DNS proxy feature.
If the Primary and Secondary DNS Server fields in DHCP Setup are not specified, i.e., left as 0.0.0.0, the
router tells the DHCP clients that it by itself is the DNS server. When a computer sends a DNS query to the
router, the router forwards the query to the real DNS server learned through IPCP and relays the response
back to the computer.
Please note that DNS proxy works only when the ISP uses the IPCP DNS server extensions. It does not mean
you can leave the DNS servers out of the DHCP setup under all circumstances. If your ISP gives you explicit
DNS servers, make sure that you enter their IP addresses in the DHCP Setup menu. This way, the router can
pass the DNS servers to the computers and the computers can query the DNS server directly without the
router's intervention.
6-4
Ethernet Setup
Advertisement
Table of Contents
