Table of Contents
Advertisement
Prestige 202H User's Guide
Step 2.
Enter 2 to display Menu 15.2 - NAT Server Sets as shown next.
Step 3.
Enter 1 to go to Menu 15.2 NAT Server Setup as follows.
Step 4.
Enter a port number in an unused Start Port No field. To forward only one port, enter it again in
the End Port No field. To specify a range of ports, enter the last port to be forwarded in the End
Port No field.
Step 5.
Enter the inside IP address of the server in the IP Address field. In the following figure, you have
a computer acting as an FTP, Telnet and SMTP server (ports 21, 23 and 25) at 192.168.1.33.
11-14
Menu 15.2 - NAT Server Sets
1. Server Set 1 (Used for SUA Only)
2. Server Set 2
3. Server Set 3
4. Server Set 4
5. Server Set 5
6. Server Set 6
7. Server Set 7
8. Server Set 8
9. Server Set 9
10. Server Set 10
Enter Set Number to Edit:
Figure 11-10 Menu 15.2 NAT Server Sets
Menu 15.2 - NAT Server Setup
Rule
Start Port No.
---------------------------------------------------
1.
Default
2.
21
3.
0
4.
0
5.
0
6.
0
7.
0
8.
0
9.
0
10.
0
11.
0
12.
0
Press ENTER to Confirm or ESC to Cancel:
Figure 11-11 Menu 15.2 NAT Server Setup
End Port No.
IP Address
Default
0.0.0.0
25
192.168.1.33
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
Dial-in Setup
Advertisement
Table of Contents
