ZyXEL Communications Prestige 202H User Manual page 159

TCP Maximum
Incomplete
Blocking Time
(minute)
Click Back to return to the previous screen. Click Apply to save your customized settings and exit this
screen. Click Cancel to return to the previous configuration. Use the Help icon to view field
descriptions.
Configuring Firewall with the Web Configurator
Table 14-4 Attack Alert
This is the number of existing half-open
TCP sessions with the same destination
host IP address that causes the firewall to
start dropping half-open sessions to that
same destination host IP address. Enter a
number between 1 and 250. As a general
rule, you should choose a smaller number
for a smaller network, a slower system or
limited bandwidth.
When TCP Maximum Incomplete is
reached you can choose if the next
session should be allowed or blocked. If
you select the Blocking Time checkbox,
any new sessions will be blocked for the
length of time you specify in the next field
(min) and all old incomplete sessions will
be cleared during this period. If you want
strong security, it is better to block the
traffic for a short time, as it will give the
server some time to digest the loading.
Enter the length of Blocking Time in
minutes.
Prestige 202H User's Guide
10 existing half-open TCP
sessions.
10
minutes (default)
0
14-11