Table of Contents
Advertisement
Prestige 202H User's Guide
Press Space Bar to Toggle.
Figure 20-9 Menu 24.3.3 System Maintenance Accounting Server
FIELD
Accounting Server
Active
Type
Server Address
Port #
Key
When you have completed this menu, press [ENTER] at the prompt "Press [ENTER] to confirm or [ESC]
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
20.6 Call Triggering Packet
Type 3 in menu 24.3 to open Menu 24.3.4-Call Triggering Packet. This menu allows you to view the
packets that triggered dial-out calls in a human-readable format. An example is shown next.
20-10
Menu 24.3.3 - System Maintenance - Accounting Server
Accounting Server:
Active= No
Type: RADIUS
Server Address= ?
Port #= 1646
Key= ********
Press ENTER to Confirm or ESC to Cancel:
Press the [SPACE BAR] to select Yes and press [ENTER] to
enable wireless client authentication through an external
accounting server.
This non-editable field shows the type of accounting server being
used.
Enter the IP address of the external accounting server in dotted
decimal notation.
The default port for the Radius server for accounting is 1646. You
do not need to change this value unless your network administrator
instructs you to do so.
Specify a password (up to 31 alphanumeric characters) as the key
to be shared between the external accounting server and the
Prestige.
DESCRIPTION
System Information and Diagnosis
EXAMPLE
Yes
RADIUS
10.11.12.133
1646
Advertisement
Table of Contents
