Table of Contents
Advertisement
Prestige 202H User's Guide
Copyright (c) 1994 - 2002 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
config
ipsec
ras>
22.2 Call Control Support
The Prestige provides four call control functions: call control parameters, blacklist, budget management and
call history.
Call control parameters allows you to set a dial out time limit, the number of times a number should be
called before it is added to the blacklist and the interim between calls.
The budget management function allows you to set a limit on the total outgoing call time of the Prestige
over a period of time. When the total outgoing call time exceeds the limit, the current call will be dropped
and any future outgoing calls will be blocked.
The blacklist function prevents the Prestige from re-dialing to an unreachable phone number. It is a list of
phone numbers, up to a maximum of 14, to which the Prestige will not make an outgoing call. If the
Prestige tries to dial to a phone number and fails a certain number of times (configurable in Menu 24.9.1),
then the phone number is placed on the blacklist. You will have to enable the number manually before the
Prestige will dial that number again.
Call history chronicles preceding incoming and outgoing calls.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 - System Maintenance -
Call Control, as shown in the next table.
22-2
exit
device
isdn
radius
ppp
hdap
Figure 22-2 Valid Commands
Menu 24.9 - System Maintenance - Call Control
1.
Call Control Parameters
2.
Black List
3.
Budget Management
4.
Call History
Enter Menu Selection Number:
Figure 22-3 Menu 24.9 Call Control
ether
ip
SMT Menus 24.8 to 24.10
Advertisement
Table of Contents
