Table of Contents
Advertisement
Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the time and date
settings of your Prestige as shown in the following screen.
Figure 22-9 Menu 24.10 System Maintenance: Time and Date Setting
The following table describes the fields in this screen.
FIELD
Use Time
Server when
Bootup
SMT Menus 24.8 to 24.10
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= NTP (RFC-1305)
Time Server Address= tick.stdtime.gov.tw
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT+0800
Press ENTER to Confirm or ESC to Cancel:
Table 22-4 Time and Date Setting Fields
Enter the time service protocol that your timeserver sends when you turn
on the Prestige. Not all timeservers support all protocols, so you may have
to check with your ISP/network administrator or use trial and error to find a
protocol that works. The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) the default, is similar to Time (RFC-868).
None enter the time manually.
Prestige 202H User's Guide
00 : 00 : 00
11 : 23 : 16
2000 - 01 - 01
2001 - 03 - 01
DESCRIPTION
22-7
Advertisement
Table of Contents
