Table of Contents
Advertisement
Prestige 202H User's Guide
ISDN
1.
2.
3.
4.
5.
TCP/IP
11. Internet Setup Test
12. Ping Host
Figure 20-11 Menu 24.4 System Maintenance Diagnostic
Follow the procedure next to get to Diagnostic:
Step 1.
From the main menu, type 24 to open Menu 24 – System Maintenance.
Step 2.
From this menu, type 4. Diagnostic to open Menu 24.4 – System Maintenance – Diagnostic.
FIELD
Hang Up B1 Call
Hang Up B2 Call
Reset ISDN
ISDN Connection Test
Manual Call
20-12
Menu 24.4 - System Maintenance – Diagnostic
Hang Up B1 Call
Hang Up B2 Call
Reset ISDN
ISDN Connection Test
Manual Call
Enter Menu Selection Number:
Manual Call Remote Node= N/A
Host IP Address= N/A
Table 20-4 System Maintenance Menu Diagnostic
This tool hangs up the B1 channel. It is only applicable if the B1 channel is
currently in use.
This tool hangs up the B2 channel. It is only applicable if the B2 channel is
currently in use.
This command re-initializes the ISDN link to the telephone company.
You can test to see if your ISDN line is working properly by using this option.
This command triggers the Prestige to perform a loop-back test to check the
functionality of the ISDN line. If the test is not successful, note the error
message that you receive and consult your network administrator.
This provides a way for you to place a call to a remote node manually. This
tests the connectivity to that remote node. When you use this command, the
screen displays what is happening during the call setup and protocol
negotiation. The following is an example of a successful connection.
System
21. Reboot System
22. Command Mode
DESCRIPTION
System Information and Diagnosis
Advertisement
Table of Contents
