Table of Contents
Advertisement
3.
ALARMS
When an alarm is violated, the buzzer sounds, and the alarm icon (
message display appear (see section 5.5.3). If an alarm occurs, change the steering
mode to the STBY mode and control the vessel with the helm.
You can see which alarm(s) has been violated by opening [Alarm Log] from the [Sys-
tem Setup] menu. A maximum of 20 alarms are listed on [Alarm Log] (see
section 3.13).
3.1
Alarm Menu
All alarm operations are done from the [Alarm] menu. To show the [Alarm] menu, do
as follows:
1. Long press the
2. Rotate the Course control knob to select [Other Menu] then push the knob.
3. Rotate the Course control knob to select [Alarm] then push the knob.
The [Alarm] appears on the display.
key to open the menu.
Alarm
Buzzer:
Internal
Buzzer Interval: Short
Watch Alarm: OFF
Deviation Alarm: 30°
XTE Alarm: OFF
) and a pop-up
3-1
Advertisement
Table of Contents
