Message Board; Message Description - Furuno NAVpilot 711C Operator's Manual

5.5.2

Message board

The message board contains the information about the latest alarm/error messages.
To show the message board, do as follows:
1. Long press the
2. Rotate the Course control knob to select [Message] then push the knob.
Message no.,
message category
See section 5.5.3.
To close the message board, press the
5.5.3

Message description

Error
Error message
no.
Alarm
5101 Deviation alarm
5103 Wind deviation alarm
5105 Arrival alarm
5107 Cross track error
5203 The preset time has passed.
5301 Heading change alarm
5303 True wind speed alarm
5305 App wind speed alarm
5307 Speed alarm
5309 Water temp alarm
5311 Depth alarm
5313 Trip alarm
Error
1101 Too fast to go fishing mode. Please
slow down less than 10 kn.
1102 Reduce Speed For SABIKI (<5kn)
1201 Communication error
1203 FU remote controller error
1301 Missing heading data
1303 Heading data is shifted.
5. MAINTENANCE, TROUBLESHOOTING
key to open the menu.
Message
Alarm 1/1
0013 Fail
Rudder drive error
Push MENU key to return
Deviation alarm violated.
Wind deviation alarm violated.
You are nearing a waypoint.
Your boat is off course by the amount set on the
XTE alarm.
The watch alarm has activated. Operate any key to
confirm presence.
Heading change alarm violated.
True wind alarm violated (sailboats only).
Apparent wind alarm violated (sailboats only).
Speed alarm violated.
Water temperature alarm violated.
Depth alarm violated.
Your boat has traveled the distance set for the trip
alarm.
Set speed below 10 knots then go to respective
mode.
Speed is in excess of 5 kn. Reduce speed to less
than 5 kn to use the SABIKI mode.
No communication between processor unit and
control unit. Turn off power.
Check remote controller.
Check heading sensor.
Heading data has changed abruptly. Check head-
ing sensor.
Message no./ Message no./
total no. of messages total no. of messages
Message Message
See section 5.5.3. See section 5.5.3.
key.
Meaning, remedy
5-13