Specifications - Furuno NAVpilot 711C Operator's Manual

FURUNO
1 CONTROL UNIT
1.1 FAP-7011C
Display
Effective display area
Backlight
Brilliance
1.2 FAP-7001 (option)
Display
Effective display area
Backlight
Contrast
2 PROCESSOR UNIT
2.1 Steering mode
2.2 Weather mode
2.3 Rudder gain
2.4 Counter rudder
2.5 Trim gain
2.6 Course change speed
2.7 Rudder angle settings
2.8 Alarm
2.9 Motor/ Solenoid drive
2.10 Clutch/ Bypass drive
3 IPS INTERFACE UNIT (OPTION)
3.1 Control system
3.2 Steering mode
3.3 Rudder function
4 INTERFACE
4.1 Number of port
NMEA0183
CAN bus
Relay contact output
SPECIFICATIONS OF AUTOPILOT
NAVpilot-711C
4.1-inch TFT color LCD
82.56 x 61.92 mm, QVGA (320 x 240 dot)
8 steps
2
700 cd/m typical
3.8-inch monochrome dot matrix LCD
85.2 x 43.6 mm (160 x 80 dot)
8 steps
16 steps
STBY, Auto, Dodge, Turn, Remote, Advanced auto*, Navigation*,
Wind*, FishHunter
AUTO, MANUAL-CALM/ MODERATE/ ROUGH
AUTO/1-20 (Manual)
AUTO/0-20 (Manual)
AUTO/1-20 (Manual)
1-30 deg/s
10-45 deg
Heading deviation, Cross-track error*, Ship's speed*, Depth*,
Water temperature*, Wind*, Watch, Log trip*
25A continuous, 50A for 5 seconds
3A
*: external data required
EVC system
Auto, Manual, Dodge, Turn, Remote, Advanced auto*, Navigation*,
Wind*, FishHunter
Weather status, Rudder angle, Rudder gain, Trim gain,
Course change speed (setting range: same as processor unit)
2 ports (includes the port for IPS interface unit)
1 port
2 ports, alarm and status, 30V max., 3A max.
SP - 1
TM
*
TM
*, Override (*: external data required)
NAVpilot-711C
E7278S01C
140909