Nmea0183 Test; Can Bus Test - Furuno NAVpilot 711C Operator's Manual

5.3.5

NMEA0183 test

This test checks for correct input and output of NMEA 0183 data from PORT1 and
PORT2. Open the diagnostic test options window, select [NMEA0183 TEST] then
push the Course control knob.
To close the test result, press the
Test result items of the NMEA0183 test
• [PORT1]/[PORT2]: Test result of the communication with NMEA0183 equipment
("OK" or "NG"). "- -" appears when there is no NMEA0183 equipment connection.
5.3.6

CAN bus test

This test checks the CAN bus network. Open the diagnostic test options window, se-
lect [CAN Bus Test] then push the Course control knob.
To close the test result, press the
Test result item of the CAN bus test
• [CAN Bus]: Test result of the communication with CAN bus network "OK" or "NG").
"- -" appears when there is no CAN bus network connection.
NMEA0183 Test
PORT1: OK
PORT2: OK
CAN Bus Test
CAN Bus: OK
5. MAINTENANCE, TROUBLESHOOTING
key.
key.
5-5