Furuno NAVpilot 711C Operator's Manual page 38

Hide thumbs Also See for NAVpilot 711C:
Table of Contents

Advertisement

2. STEERING MODES
4. Push the Course control knob to start the turn.
The message "Start to turn by fishing mode" appears, then your boat starts the
turn selected.
Note: The orbit and spiral turns require that the speed of the boat be less than 10
kn. If the speed is higher, the message "Too fast to go fishing mode." appears.
Reduce boat's speed to less than 10 kn.
During the turn, the ship mark, which indicates own ship's course movement, appears
on the turn display. The ship mark does not show accurate ship's movement. To quit
the turn, press the
After the turn is completed, the message "Turn ended." appears.
Circle turn
Ship mark
Ship mark
Orbit turn
Radius
Radius
See section 2.6.3.
See section 2.6.3.
2-14
key.
The rate of turn
See section 2.6.3.
Ship mark
Ship mark

Advertisement

Table of Contents
loading

Table of Contents