Table of Contents
Advertisement
4.4.6 Remote Elevation Measurement （ REM ）
The Remote Elevation program calculates the vertical distance (VD) of a
remote object relative to ground.
elevation measurement will start from the prism (reference point). If no
prism height is used, the remote elevation will start from any reference point
in which the vertical angle is established. In both modes, the reference point
should be perpendicular to the remote object.
1) With prism height (PH) input
Operation steps
①Under
distance
measurement
click
"REM"
key
activate
elevation measurement.
Keys
【REM】
mode,
to
remote
When using a prism height, the remote
Display
41
Advertisement
Table of Contents
