JUKI AMS-210E-1306 Instruction Manual page 93

6) Press key and set as follows with
or key.
X Scale rate
Y Scale rate
Max. speed limitation
Thread tension
Presser height
7) Press key and "X Scale rate
indication becomes 0.0. Traveling amount in
X direction can be set in 0.1 mm unit. Set 0.5
with or
8) Press
indication becomes 0.0. Traveling amount in
Y direction can be set in 0.1 mm unit. Set –1.0
with or
9) Press key.
Data is determined, and the pattern register
mode ends. When
set data is canceled.
10) Press key.
Mode setting is finalized and the mode
returns to the normal mode.
– 89 –
: "50.0"%,
: "80.0"%,
: "2000" rpm,
: "50"
: "0"
key.
key and "Y Scale rate
key.
key is pressed, the
"
"