Table of Contents
Advertisement
No.
Selection of needle upper dead point at the time of origin
retrieval/return to origin
Temporary stop : thread trimming operation
Main motor X/Y feed synchronized control : speed/pitch
Intermediate presser with/without control
Intermediate presser lowering timing
Item
0 : Without
1 : With
0 : Automatic thread trimming
1 : Manual (Thread trimming by turning Stop
SW ON again)
0 : 2700rpm/3. 0mm
1 : 2200rpm/3. 0mm
2 : 1800rpm/3. 0mm
3 : 1400rpm/3. 0mm
0 : Without (Lowering fixed)
1 : With (Lowering with sewing data at the time
of operation)
2 : With (Lowering even at the time of feed
forward/backward)
0 : Immediately before start-up of machine head
1 : Synchronized with the last feeding frame
– 104 –
Setting range
Edit unit
---
---
---
---
---
---
---
---
---
---
Advertisement
Table of Contents
